RASPBERRY PI STYLE ENCLOSURES Wolfson Pi Audio Enclosure and Raspberry Pi Style Enclosures universal Enclosures hand held cases heavy duty enclosures DIN Rail Boxes No screws - just add your Raspberry Pi filling! * * * * Designed to house the Raspberry Pi & Wolfson Audio Card via clip-in grooves - NO SCREWS REQUIRED! All cut-outs and knock-outs are pre-cut into the case Pre-defined microphone sensor slots Supplied with four rubber feet * Supplied with LED light pipes * High Gloss Finish * Pi Camera slots can be opened with a flat headed screwdriver * Pi Camera mount knockout can be opened with a screwdriver Interface supports control stations diecast & metal boxes Material: * Thickness 3mm: HB Rated * Carbon Fibre Finish: Acrylic Capped ABS * Light Pipes: Transparent Acrylic Desktop & Instrument cases Potting Boxes Raspberry Pi and Wolfson Audio Card assemblies not included CB PART NO. CBDBWA-CAR COLOURS Carbon Fibre Carbon Fibre * Carbon fibre finish:Acrylic capped ABS 19'' Enclosures Light Pipe Assembly 1. Place your Wolfson Pi audio top onto a steady surface. 19" CaBINETS 2. Peel off the protective film on the light pipes. 3. Apply two drops of glue into the larger recess and one drop of glue into the smaller recess (We recommend using Farnell's Permabond C203 Super Glue ) DEVELOPMENT BOARDS 4. Ensuring that the light pipes are in the correct orientation as shown, place into the recess and hold for five seconds ensuring that the light pipes are perpendicular to the enclosure top. custom sized enclosures Custom Services Ver 1.0 EL EC T RO N IC S & ENC LOSURES We operate a constant improvement policy, our products are subject to change without notice. +44 (0)1638 716101 info@camdenboss.com www.camdenboss.com